TL;DR - In Verify, open a task card with the model showing, and select Check beside Geometry. AI looks at the model elements linked to the task and marks Detail, Completeness, Placement and Purpose as Pass, Partial, Fail or Can't judge, each with a short reason, then scores the task against your pass mark (80% unless you set another). The Geometry check is in beta: type add me in Support to join.
Who this is for
Anyone in the beta testing community who can see the task in Verify, working on a computer (the check isn't offered on phones). Changing the project's pass mark needs the Manage Project Settings permission.
Why it matters
LOD is usually a number typed into a spreadsheet cell or a model parameter. "LOD 300" in a cell proves that somebody typed 300. The Geometry check looks at the geometry itself and judges it against what the task asks for, so the conversation moves from "what does LOD 300 mean?" to "here's what to fix first".
Before you start
The Geometry row appears on a task card in Verify when:
- The task has a level of detail. Tasks made with Create scope from a model start at LOD 300, and the levels on offer come from your project's standard.
- Model elements are linked to the task. If they aren't, the row reads Link elements to check. See How to map tasks to model elements with mapping rules.
- The model is open in the Verify viewer. If it isn't, the row reads Open the model to check.
- It's a single task, not a group of tasks.
The check also reads the task's description and its milestone, so a clear description and a milestone that says what the model is for (such as design coordination) give better answers.
Run the Geometry check
- In Verify, open your Work Package so the model shows in the viewer.
- On the task card, select the arrow on its left to open it. The card lists one row per check, such as Information and Geometry.
- Beside Geometry, select Check (the tooltip reads "Check this task's model geometry with AI").
- Wait while it works. The row reads Analyzing the model..., then Evaluating..., then Preparing results.... While Plannerly takes its pictures, the viewer is covered for a moment and then put back as it was.
One Geometry check uses the viewer at a time. If another is running, you'll see "Another geometry check is using the model. Try again when it finishes."
Read the result
The Geometry row shows the task's score as a percentage, with a ring of the four verdicts in the same colours as the Information check. The score is green when it meets your pass mark (80% unless you've set another), amber when it's below, and grey when nothing could be judged. Open the row for the detail:
| Heading | What it asks |
|---|---|
| Detail | Does the geometry reach the level of detail the task requires? Placeholder boxes fail where real shapes are needed. More detail than required is fine. |
| Completeness | Are the elements there throughout, without gaps, on every level they should be? It shows, for example, 1 of 3 occupied levels - hover it to see which levels are missing. |
| Placement | Do the elements look like what the task names, plausibly placed and joined, not floating or duplicated? |
| Purpose | Would these elements serve their purpose at this milestone, such as coordination, costing or fabrication? |
Each heading is marked Pass, Partial, Fail or Can't judge, with one or two sentences saying why. Can't judge means the pictures don't show enough to decide, and it doesn't count towards the score. A short summary says what looks right and what to fix first, and below the headings are the pictures it judged: the overview, each level and a close-up of the geometry. Select a picture to enlarge it.
Open the task from Verify, with its model loaded, and the same result shows in the task window too, inside the task's Geometry field, next to what the task asks for.
What the check judges against
The Geometry check reads what the task asks for: its required level of detail (the Geometry and Reliability levels and what they mean in your project's standard, including what the Geometry check looks for at that level), the task's description and fields, and its milestone. If your company has its own LOD scale, its wording is what the check uses - see Create your company's own LOD scale in Plannerly.
It doesn't check properties and values - that's the Information check (see How to check a BIM model against information requirements). And because it judges pictures of the model, it can't measure exact sizes or tolerances. On an As-Built task the measured accuracy (LOA) is shown but not scored.
Set the pass mark
- In Verify, select Settings, then the Verify tab.
- Open Geometry check.
- In Pass mark, type a whole number from 1 to 100.
Leave it empty to use the pass mark of your company's Geometry standard, or the Plannerly default of 80%. New checks use the new pass mark; earlier results keep the one they were judged against.
If it doesn't work
There's no Geometry row on the card
Check that you've joined the beta testing community, that you're on a computer and that the card is a single task. A task whose Geometry has been excluded isn't checked against the model at all. To check it, include Geometry for the task again from Excluded Fields.
The row says Link elements to check
No model elements are linked to the task yet. Add or fix its mapping rules, then run Link and check in Verify.
The row says Open the model to check
The elements are linked, but the model they're in isn't open. Open the Work Package's model in the Verify viewer and the Check button appears.
A heading says Can't judge
The pictures didn't show enough to decide. A clearer task description, or linking only the elements the task really covers, usually helps. If every heading is Can't judge, the result reads Nothing assessed.
The check says it couldn't finish
Messages such as "The geometry check couldn't finish. Try again." or "The AI service didn't answer in time. Try again in a few minutes." mean the run stopped part way. Run the check again. If it keeps happening, tell us in Support.
Common questions
How do I check LOD 300 automatically?
Give the task LOD 300 in Scope, link its model elements, then run the Geometry check on its card in Verify. It judges Detail, Completeness, Placement and Purpose against what LOD 300 means in your project's standard.
Do my models need an LOD parameter?
No. The check looks at the geometry itself, not at a value someone typed into the model.
Does the Geometry check replace clash detection?
No. It judges whether the geometry is detailed enough, complete, sensibly placed and fit for its purpose. It can't measure exact sizes or tolerances, so clash, clearance and coordination checks are a separate job.
Does it check property values too?
No. Properties are the Information check's job. Run both on the same card to see a task's information and geometry side by side.
Can I share the results?
Yes. A Verify PDF report includes each task's Geometry check, with its score, reasons and pictures, when the person creating it is in the beta. See Export a BIM model check report to PDF.
How do I join the beta?
Sign in to Plannerly, open Support and type "add me", then select Yes. Or switch on Beta testing community in your notification preferences.
Related
- AI BIM model checking: the complete guide - the whole webinar, with all three demos.
- Create your company's own LOD scale in Plannerly - write what each level means.
- How to check a BIM model against information requirements - the Information check.
- Join the Plannerly beta testing community
- Level of Development (LOD) 100 to 500 in BIM - the scales explained.
Take the free Certified Plannerly Professional course - short videos for every step, with a certificate when you finish.
